Available in a range of China Screws Manufacturers – 6mm, 8mm, 10mm, 12mm and 14mm – the strengths of the CLS-CE concrete screw include a high mechanical performance and high flexibility in use – thanks to three different depths of installation for each diameter.

“Through our innovative solutions we have been able to enhance our presence across Europe, especially where professionalism and product quality are needed,” explains Bossong.

The new concrete screw CLS-CE has a European Technical Assessment for cracked and non-cracked concrete (ETA – 17/0471), with seismic qualification in category C1 and with fire resistance R120.For its mechanical anchor range, Bossong recently announced two new heavy-duty anchors that are now available on the market – the new concrete screw CLS-CE and the new mechanical anchor NWS-CE1 – both of which have been assessed following the recent EAD 330232-00-0601.There is also the possibility of adjustment after installation of the screw –

the CLS-CE can be recoiled twice up to 10mm if the nominal embedment depth is guaranteed. Each type of head has a different type of assortment with different length and diameters.”

The complete range of TLM machines is composed of die rolling machines (M1 – M30), rotary unit rolling machines, chamfering machines, screw and washer assemblers – available in three formats depending on the diameters of the washers to be loaded, micro, standard and heavy washer assembly units, screw and bushing assemblers, combined machines, die rolling machine and rotary unit rolling machine, die rolling machine and chamfering machine, as well as die rolling machine and washer loader (single or double)

The bronze plates where the slide carrying the threading tool moves are fixed on the ground surfaces, and this technology allows for tighter tolerances on the screws produced – guaranteeing even better precision in the machined piece.Furthermore, the oil is recovered and filtered by the control unit, which then sends it back into circulation.

The machines are equipped with an additional lubrication system for hard screws or screws with a great deal of deformation.The need has thus arisen for European companies to produce large quantities using machines that are reliable over the long-term, as well as being easy to use and quick to equip, to simplify operators’ tasks.

For this reason, TLM takes particular care of all processing and finishing. The drive that controls screw insertion into rolling is completely mechanical and mechanically connected to the rod linkage that moves the die holder slide.The strategic choices behind TLM machine technology 23 March 2018 wire® stand: 15.